Home ScaleBan Iron Water? Sulfer Smell? Acid Water? UV System Pool UV Lights
Booster Pump Pressure Tank Generators PureWash Testimonials TV Commercials Contact Us
Cover Stories

Acid Water?

No more blue/green stains in your wash basins, sinks, and tubs. No more pin-hole leaks in your pipes. No more corrosion of valves due to acidic water.

The pH of water measures its acidity or alkalinity. Water with a pH of less than 7.0 is acidic, above 7.0 is alkaline, and a pH of 7.0 is neutral. 

The lower the pH value is below 7.0 the greater the acidity, and the higher the pH value is above the 7.0 the more alkaline. Acidic water (less than 7.0) is corrosive to pipes, appliances and anything that is metal that water comes in contact with. 

At home the visual signs are blue/green stains in your sinks, toilets, and bathtubs. Pin-hole leaks are quite common in households with a low pH and copper pipes.

The solution is a non-chemical process that naturally raises the pH to neutral (7.0) without the need for a complicated backwashing tank, or water softener.

No electricity cost. No Backflush. No salt or chemicals. Clean and simple.


The principles of operation is such that the pH increasing media "Calcium" is sacrificial, that is it slowly dissolves during the process of increasing the pH. The rate this occurs is proportional to the pH increase and amount of water used,. 

In most cases you will only have to add media once every 18-24 months depending on volume of water used. There is no need to backwash this system and waste hundreds of gallons of water a year as well as waste the sacrificial media. This is eliminated with our deluxe reusable pre-filter which goes in front of our media tank and after tank.

No need for a water softener after the pH Acid Neutralizer with the use of our proprietary ScaleBan™ System.

717-627-1001 • 412 Rome Rd • Lititz PA 17543